| |
TM 10-3930-669-20
4-10. FUEL/WATER SEPARATOR REPLACEMENT/REPAIR (CONT).
(7)
Install fuel container (15) on fuel/water
separator
head
(16)
with
preformed
packing (14), washer (13), and screw (12).
e.
Installation.
(1)
Fill fuel/water separator (1) with clean
fuel.
(2)
Install
bracket
(10)
and
fuel/water
separator (1) on filter tray (11) with two
screws (9), washers (8), and nuts (7).
(3)
Install two hoses (3 and 4) on fittings (5
and 6) with two clamps (2).
(4)
Remove
wiping
rags
from
under
fuel/water separator (1).
(5)
Start engine (TM 10-3930-669-10).
NOTE
Run engine for five minutes to allow
air to escape from fuel system.
(6)
Shut off engine (TM 10-3930-669-10).
NOTE
Follow-on Maintenance:
•
Close right-hand engine access cover (TM 10-
3930-669-10).
•
Remove wheel chocks (TM 10-3930-669-10).
END OF TASK
4-34
|
