TM 10-3930-669-20 CAUTION Area around moisture bowl must be very clean.  Any contaminants entering fuel/water separator head will damage equipment. (2) Using    wiping    rags,    clean    area    around fuel/water separator (1). NOTE • Cap and plug all hoses after removal. • Tag and mark all hoses prior to removal. (3) Loosen two clamps (2) and remove hoses (3 and 4) from fittings (5 and 6). (4) Remove two nuts (7), washers (8), screws (9),  fuel/water  separator  (1)  and,  bracket (10) from filter tray (11). b. Disassembly. (1) Remove screw (12), washer (13), preformed packing (14), and fuel container   (15)   from   fuel/water   separator head (16).  Discard preformed packing. 4-29