| |
TM 10-3930-669-20
b.
Installation.
(1)
Position heat shield (4) in cylinder head
(3).
NOTE
All four injectors are installed the
same way. No. 2 injector is shown
installed.
When installing injector, align to fuel
pipe prior to tightening.
(2)
Install injector (2) in cylinder head (3) with
cap screw (1). Tighten cap screw to 18 to
22 lb-ft (25-30 Nom).
NOTE
Follow-on Maintenance:
Install fuel pipes (Para 4-5).
Install cab (Para 15-2).
Remove wheel chocks (TM 10-3930-
669-10).
END OF TASK
4-3
|