TM 10-3930-669-20 3-6.  ENGINE OIL AND FILTER REPLACEMENT (CONT). a. Removal. (1) Start engine (TM 10-3930-669-10) and run for five minutes. (2) Shut off engine (TM 10-3930-669-10). WARNING •   Engine oil may be hot when drained.  Do not come in contact with hot oil. Failure to do so may result in injury to personnel. •   Engine oil is slippery and can cause falls.  To avoid injury, wipe up spilled oil with rags. NOTE •  Forklift should be on level surface to ensure oil level can be checked correctly and that all oil is drained. •    Position  suitable  drain  pan  with  an  12  qt  (11  1)  capacity  under  drain  plug  prior  to  start  of procedure. •  Engine oil will come out immediately when drain plug is removed. •  Allow five minutes for engine oil to settle before draining. (3) Remove drain plug (1) and preformed packing (2) from drain plate (3).  Discard preformed packing. 3-24