TM 10-3930-669-20 3-5.  ENGINE OIL FILTER ADAPTER ASSEMBLY REPLACEMENT/REPAIR (CONT). NOTE If    bracket    was    removed,    perform steps  (8)  and  (9).    If  not,  go  to  step (9). (8) Install  bracket  (19)  on  engine  (22)  with  washer (21) and screw (20). (9) Install  two  hoses  (12  and  13)  on  bracket  (19) with  four  clamp  halves  (18),  two  clamp  plates (17), and four screws (16). (10) Install two hoses (12 and 13) on fittings (14 and 15) and tighten fittings (10 and 11). (11) Install  fuel/water  separator  (8)  on  filter  tray  (9) with  bracket  (7),  two  screws  (6),  washers  (5), and nuts (4). 3-20