TM 10-3930-669-20 b.   Adjustment NOTE •   All turning of engine will be done using the alternator pulley nut and the alternator belt. •   All turning of engine will be described as if looking at the crankshaft pulley end of engine. •   Rocker arm adjustment for cylinder No.  1 is shown.  Adjustment for all other cylinders is similar. (1) Prepare   engine   (1)   for   valve   overlap   of   cylinder   (2)   (Para   3-3)   and   corresponding   cylinder   valve adjustment.  Refer to Table 3-1. Table 3-1.  Valve Adjustment Sequence Cylinder Valve Overlap Valve Adjustment No.  4. No 1 No.  3. No 2 No.  1. No 4 No.  2 No.3 3-9