| |
TM 10-3930-669-20
DRIVE AXLE OIL LEVEL CHECK
(1)
Remove check/fill plug (LO 10-
3930-669-12).
(2)
Check oil level (LO 10-3930-669-
12).
(a)
If oil level is low, drain and
refill
axle
housing
and
planetaries.
(b)
If oil level is correct, oil level
is OK.
(3)
Install check/fill plug.
VERIFY REPAIR
(1)
Start engine (TM 10-3930-669-10).
(2)
Operate forklift and listen for drive
axle noise.
(a)
If
drive
axle
noise
is
excessive, fault not corrected.
Perform
Step
(3)
below.
Repeat procedure and notify
Supervisor.
(b)
If drive axle noise is not
excessive, fault corrected.
(3)
Shut down engine.
2-383
|
