TM 10-3930-669-20 AUDIBLE INSPECTION (1) Start engine (TM 10-3930-669-10). (2)    Set    transmission    control    lever    in    reverse position  and  listen  to  transmission  (TM  10-3930- 669-10). (a)     If     transmission     makes     excessive     noise, perform Step (3) below and notify DS Maintenance. (b)    If    transmission    does    not    make    excessive noise, transmission is OK. (3) Shut down engine. VERIFY REPAIR (1) Start engine (TM 10-3930-669-10). (2)    Set    transmission    control    lever    in    reverse position and observe forklift (TM 10-3930-669-10). (a) If transmission does not operate normally, fault   not   corrected.      Perform   Step   (3)   below. Repeat procedure and notify Supervisor. (b)   If   transmission   operates   normally,   fault corrected. (3) Shut down engine. 2-321