TM 10-3930-669-20 AUDIBLE INSPECTION (1) Start engine (TM 10-3930-669-10). (2) Place transmission control lever in the forward position and listen to transmission (TM 10-3930-669-10). (a)  If  transmission  makes  excessive noise,  perform  Step  (3)  below  and  notify DS Maintenance. (b)   If   transmission   does   not   make excessive noise, transmission is OK. (3) Shut down engine. VERIFY REPAIR (1) Start engine (TM 10-3930-669-10). (2) Place transmission control lever in the forward  position  and  observe  forklift  (TM 10-3930-669-10). (a)  If  transmission  does  not  operate normally,   fault   not   corrected.      Perform Step  (3)  below.    Repeat  procedure  and notify Supervisor. (b) If transmission operates normally, fault corrected. (3) Shut down engine. 2-309