| |
TM 10-3930-669-20
VERIFY REPAIR
(1) Set MAIN POWER switch to ON
position (TM 10-3930-669-10).
(2) Set engine switch to ignition position
(TM 10-3930-669-10).
(3) Set front light switch to ON position
(TM 10-3930-669-10).
(4) Observe gauge light.
(a) If gauge light does not operate,
fault not corrected. Perform Steps
(5) through (7) below. Repeat
procedure and notify Supervisor.
(b) If gauge light operates, fault
corrected.
(5) Set front light switch to OFF position.
(6) Set engine switch to off position.
(7) Set MAIN POWER switch to OFF
position.
2-197
|