| |
TM 10-3930-669-20
CONTINUITY TEST
(1) Remove rear wiper switch
(Para 7-19).
(2) Set rear wiper switch to LOW
position
(TM
10-3930-669-
10).
(3) Set multimeter select switch to
OHMS.
(4) Check continuity between rear
wiper switch, terminals 2 and
3.
(a) If there is no continuity,
replace rear wiper switch
(Para 7-19).
(b) If there is continuity, rear
wiper switch OK.
(5) Install rear wiper switch.
2-185
|
