| |
TM 10-3930-669-20
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry contacts battery terminal, a
direct short may result in instant heating of tools, damage to equipment, and injury or death to
personnel.
VOLTAGE TEST
(1) Remove instrument panel (Para 78).
(2) Set multimeter select switch to VOLTS
DC.
(3) Connect positive (+) multimeter lead to
connector wire 64 terminal.
(4) Connect negative (-) multimeter lead to
a known good ground.
(5) Start engine (TM 10-3930-669-10).
(a) If there are not 12 to 16 vdc
present, perform Step (6) below and
go to Step 4 of this Fault.
(b) If there are 12 to 16 vdc present,
perform Step (6) below and go to
Step 2 of this Fault.
(6) Shut down engine.
2-155
|
