| |
TM 10-3930-669-20
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry contacts battery terminal, a
direct short may result in instant heating of tools, damage to equipment, and injury or death to
personnel.
VOLTAGE TEST
(1) Remove instrument panel (Para 7-8).
(2) Set multimeter select switch to VOLTS
DC.
(3) Connect positive (+) multimeter lead to
ammeter, terminal I.
(4) Connect negative (-) multimeter lead to
a known good ground.
(a) If there are not 22 to 24 vdc
present,
repair
wire
11
(see
schematic Appendix F)
(b) If there are 22 to 24 vdc present,
wire 11 is OK.
2-133
|
