TM 10-3930-669-20 17-3.  TILT/LIFT JOYSTICK REPLACEMENT/REPAIR (CONT). d.  Assembly. (1) Install boot (29) on tilt/lift joystick lever (24) and tilt/lift joystick (15). (2) Install knob (28) on tilt/lift joystick lever (25). (3) Position  two  cable  retainers  (26)  on  cables  (4 and 5). (4) Install two anchors (27) on cables (4 and 5). CAUTION Hold plunger stationary when installing cable retainer or damage to tilt/lift joystick will result. NOTE Moving tilt/lift joystick lever will allow plungers to protrude from tilt/lift joystick. (5) Position   tilt/lift   joystick   lever   (24)   to   protrude each  of  two  plungers  (25)  and  install  cables  (4 and 5) and anchors (27) with two cable retainers (26). 17-16