TM 10-3930-669-20 17-3.  TILT/LIFT JOYSTICK REPLACEMENT/REPAIR (CONT). NOTE Note position of cables in housing prior to removal. (3) Remove    six    nuts    (19),    lock    washers    (20), washers  (21),  screws  (22),  washers  (21),  and housing  (23)  from  tilt/lift  joystick  (15).    Discard lock washers. CAUTION Hold plunger stationary when removing cable retainer or damage to tilt/lift joystick will result. NOTE Moving tilt/lift joystick lever will allow plungers to protrude from tilt/lift joystick. (4) Position tilt/lift joystick lever (24) to protrude each of two plungers (25) and remove two cable retainers (26), anchors (27), and cables (4 and 5) from plungers. NOTE Note position of anchors on cables prior to removal. (5) Remove    two    anchors    (27)    and    two    cable retainers (26) from cables (4 and 5). 17-14