TM 10-3930-669-20 NOTE Note routing of cables prior to removal. (6) Route tilt control valve cable (4) and lift control valve   cable   (5)   through   access   hole   in   cab frame (11). (7) Remove   four   screws   (12),   lock   washers   (13), washers (14), and tilt/lift joystick (15) from dash frame (16).  Discard lock washers. b.  Disassembly. NOTE Tilt control valve cable disassembly is shown.  Lift control valve cable is disassembled the same way. (1) Remove nut (17) and bracket (2) from tilt control valve cable (4) of tilt/lift joystick (15). (2) Remove  lock  washer  (18)  and  nut  (1)  from  tilt control  valve  cable  (4)  of  tilt/lift  joystick  (15). Discard lock washer. 17-13