TM 10-3930-669-20 17-3.  TILT/LIFT JOYSTICK REPLACEMENT/REPAIR (CONT). a.  Removal. NOTE Tag and mark brackets prior to removal. (1) Remove two nuts (1) from brackets (2). (2) Remove four screws (3) from brackets (2). (3) Slide brackets up tilt control valve cable (4) and lift control valve cable (5). (4) Remove two cotter pins (6), pins (7), tilt control valve cable (4), and lift control valve cable (5) from tilt control valve (8) and lift control valve (9).  Discard cotter pins. (5) Remove two gaskets (10) from tilt control valve (8) and lift control valve (9).  Discard gaskets. 17-12