TM 10-3930-669-20 NOTE Note position of cables in housing prior to removal. (3) Remove    six    nuts    (19),    lock    washers    (20), washers   (21),   screws   (22),   washers   (21)   and housing    (23)    from    pivot/shift    joystick    (15). Discard lock washers. CAUTION Hold plunger stationary when removing cable retainer or damage to pivot/shift joystick will result. NOTE Moving shift/pivot joystick lever will allow plungers to protrude from pivot/shift joystick. (4) Position pivot/shift joystick lever (24) to protrude each of two plungers (25) and remove two cable retainers  (26),  anchors  (27),  and  cables  (4  and 5) from plungers. NOTE Note position of anchors on cables prior to removal. (5) Remove    two    anchors    (27)    and    two    cable retainers (26) from cables (4 and 5). 17-5