TM 10-3930-669-20 NOTE Tag and mark brackets prior to removal. (1) Loosen two nuts (1) on brackets (2). (2) Remove four screws (3) from brackets (2). (3) Slide brackets (2) up pivot control valve cable (4) and lift control valve cable (5). (4) Remove two cotter pins (6), pins (7), pivot control valve cable (4), and shift control valve cable (5) from pivot control valve (8) and shift control valve (9).  Discard cotter pins. (5) Remove two gaskets (10) from pivot control valve (8) and shift control valve (9).  Discard gaskets. 17-3