| |
TM 10-3930-669-10
1-2. MAINTENANCE FORMS AND RECORDS.
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA PAM
738-750, The Army Maintenance Management System (TAMMS) (Maintenance Management UPDATE).
1-3. CORROSION PREVENTION AND CONTROL (CPC).
Corrosion Prevention and Control (CPC) of Army materials is a continuing concern. It is important that any corrosion
problems with the forklift be reported so that the problem can be corrected and improvements can be made to prevent
the problem in the future.
While corrosion is typically associated with rusting of metals, corrosion can also include deterioration of other materials,
such as rubber and plastic. Unusual cracking, softening, swilling, or breaking of these materials may be a corrosion
problem.
If a corrosion problem is identified, it can be reported using Standard Form 368, Product Quality Deficiency Report. Use
of key words such as "corrosion, rust, deterioration, and cracking" will ensure that the information is identified as a CPC
problem.
The form should be submitted to the address specified in DA PAM 738-750.
1-4. DESTRUCTION OF ARMY MATERIAL TO PREVENT ENEMY USE.
Command decision, according to the tactical situation, will determine when the destruction of the forklift will be
accomplished. A destruction plan will be prepared by the using organization unless one has been prepared by a higher
authority. For general destruction procedures for this equipment, refer to TM 750-244-6, Procedures for Destruction of
Tank-Automotive Equipment to Prevent Enemy Use (US Army Tank-automotive and Armaments Command).
1-5. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR).
If your 6,000 lb forklift needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us
what you don't like about your equipment. Let us know why you don't like the design or performance. Put it on a SF368
(Product Quality Deficiency Report). Mail it to Commander, US Army Tank-automotive and Armaments Command,
ATTN: AMSTA-TR-E/MPA, Warren, MI 48397-5000. A reply will be furnished to you.
1-6. WARRANTY INFORMATION.
The warranty starts on the date found in block 23, DA Form 2408-9 in the logbook. Report all defects in material and
workmanship to your supervisor, who will take the appropriate action. Warranty information is listed in Appendix A.
1-2
|