TM 10-3930-669-10 h. Forklift Shutdown Procedure. CAUTION Do not apply parking brake when forklift is moving unless brakes have failed. NOTE To shut down engine only, perform Steps (4) and (5) below. (1) Apply parking brake (Table 2-1, 2). (2) Place transmission control lever (Table 2-1, 5) in neutral position. (3) Lower mast assembly so that fork tips are on the ground. (4) Turn engine switch (Table 2-1, 1) to the OFF position. (5) Turn MAIN POWER switch (Table 2-1, 20) to the OFF position. (6) Chock outside of steering and drive wheels. (7) Perform operator PMCS procedures designated AFTER in the interval column (Table 2-3). i. Opening of Access Doors and Covers. (1) Cab Door.  Pull latch out and open cab door. (2) Engine Access Cover.  Turn latch clockwise and open cover. (3) Left-Hand Rear Engine Access Cover.  Release two latches and raise engine access cover. (4) Right-Hand Engine Access Cover.  Grab two lift handles and lift up on right-hand engine access cover. J. Closing of Access Doors and Covers. (1) Cab Door.  Close cab door. (2) Engine Access Cover.  Close cover and turn latch counter clockwise. (3) Left-Hand Rear Engine Access Cover.  Lower engine access cover and lock two latches. (4) Right-Hand Engine Access Cover.  Grab two lift handles and lower right-hand engine access cover. 2-35