Recoverability Code

SECTION I

TM 10-3930-664-24P

d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer (individual, company,

firm, corporation or Government activity) which controls the design and characteristics of the item by means of its

engineering drawings, specifications standards and inspection requirements to identify an item or range of items.

NOTE: When you use a NSN to requisition an item, the item you receive may have a different part number from the part

ordered.

e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following information:

(1)

The Federal item name and, when required, a minimum description to identify the item.

(2)

Physical security classification. Not applicable.

(3)

Items that are included in kits and sets are listed below the name of the kit or set on Figure KIT.

(4)

Spare/repair parts that make up an assembled item are listed immediately following the assembled item line

entry.

(5) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be

manufactured/fabricated.

(6) When the item is not used with all serial numbers on the same model, the effective serial numbers are not

shown on the last line(s) of the same model, the effective serial numbers are shown on the last line(s) of the description

(before UOC). Not applicable.

(7)

The usable on code, when applicable (see paragraph 5, Special information).

(8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each

special tool, special TMDE, and other special support equipment. When density of equipment supported exceeds density

spread indicated in the basis of issue, the total authorization is increased proportionally.

(9) The statement "END OF FIGURE" appears just below the last item description in Column 5 for a given figure

in both Section II and Section lIl.

f. QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the breakout

shown on the illustration figure, which is prepared for a functional group, sub-functional group or an assembly. A "V"

appearing in this column in lieu of a quantity indicates that the quantity is variable and the quantity may vary from

application to application.

4. Explanation of Columns (Section IV).

a. NATIONAL STOCK NUMBER (NSN) INDEX.