TM 10-3930-664-24 3. Install new packing (32), retaining ring (33) and brake piston (31) into intermediate cover (34). 4. Install new packing (21) onto spacer (20).  Install spacer into intermediate cover (34).  Secure by tightening setscrew (19). 5. Insert  remote  control  lever  (22)  into intermediate cover (34). 6. Install screw (14), washer (15), new seal (16), lever (17), and new seal (18). 7. Install mechanical stop (10)  onto intermediate  cover (34) using bolt (11) Install bolt (12) and nut (13). CAUTION Use care when installing axle case to prevent damage to articulation shaft. 8. Carefully install axle case (6) onto studs (7). 9. Apply loctite to studs (7).  Install sixteen nuts (8) onto studs (7).  Torque nuts to 25 ft-lb.  (34 N•m). 4-103