TM 10-3930-664-24 NOTE For  ease  of  assembly,  note  number and    size    of    shims    (14,    16)    when removing. 5. Remove   cover   plate   (10),   seal   (11),   and   spacer (12),   inner   race   of   bearing   (13),   shim   (14),   and spacer (15) from differential housing (9). 6. Remove shims (16) from bevel gear shaft (18). 7. Using an arbor press, remove inner race of bearing (17) from bevel gear shaft (18). 8. Remove   outer   races   of   bearings   (13,   17)   from cavities in differential housing. B.  CLEANING Clean    bevel    gear    components    in    accordance    with paragraph 1-24. C.  INSPECTION Inspect    bevel    gear    components    in    accordance    with paragraph 1-24. D.  INSTALLATION 1. Install    shims    (16)    into    front    bearing    cavity    on differential housing (9).  Press outer race of bearing (17) into cavity. 2. Press  outer  race  of  bearing  (13)  into  rear  bearing cavity in differential housing (9). 3. Press  inner  race  of  bearing  (17)  onto  bevel  gear shaft (18). 4. Install  spacer  (15),  shims  (14),  and  inner  race  of bearing (13) into differential housing (9). 5. Support   bearing   (13)   with   tube   stock   of   suitable inside  diameter.    Press  bevel  gear  shaft  (18)  with bearing (17) into differential housing (9). 6. Install  spacer  (12),  seal  (11),  cover  plate  (10),  and flange (9) onto bevel gear shaft (18). 4-91