| |
TM 10-3930-664-24
4-21. OUTPUT SHAFT ASSEMBLY REPLACEMENT
This task covers: Removal, Cleaning, Inspection, and Installation
INITIAL SETUP:
Tools and Test Equipment:
Equipment Condition:
General Mechanics Tool Kit (1, App. E)
Clutch assemblies removed
Retaining Ring Pliers (24, App. E)
(para. 4-20)
Soft Head Hammer (23, App. E)
Puller Kit (26, App. E)
Depth Gage (20, App. E)
Materials / Parts:
Loctite No. 641 (25, App. C)
Loctite No. 577 (27, App. C)
Permatex #2 Sealant (40, App. C)
O-Ring, Item 8 (1 ea.)
O-Ring, Item 31 (1 ea.)
O-Ring, Item 28 (1 ea.)
A. REMOVAL
1.
Using pliers, remove snap ring (1) from ring
groove.
2.
Carefully pry assembled output flange (2) and
bearing (6) from bearing bore.
3.
Remove plug (3) and bushings (4, 5) from output
flange (2) only if replacement of bushings is
required.
4.
Using pliers, remove retaining ring (10) from
output flange (2). Using a bearing puller,
remove bearing (6).
5.
Remove seal sleeve (7) and oil seal (9) from
output flange (2). Remove and discard O-ring
(8).
6.
Remove oil seal (9) from seal sleeve (7).
Remove snap ring (1).
4-49
|
