TM 10-3930-664-24 6. REMOVE    BRACE    (56),    LIGHT    BOX    (61),    AND BRACKET (64) FROM RIGHT REAR FENDER (57). REMOVE LIGHTS (53, 70). a. Remove fender brace (56) from right rear fender (57)  by  removing  screw  (58),  washer  (59),  and nut (60). b. Remove fender brace (56) from light box (61) by removing screw (62) and nut (63). c. Remove  light  box  (61)  from  fender  bracket  (64) by removing screws (65) and nuts (66). d. Remove fender bracket (64) from fender (57) by removing  screws  (67),  washers  (68),  and  nuts (69). e. Remove  drive  light  (70)  from  light  box  (61)  by removing screw (71), washer (72) and nut (73). f. Remove backup alarm (74) by removing screws (75) and nuts (76). g. Remove   composite      light      (53)      by   removing screws (54) and washers (55). 7. REMOVE  DATA  PLATES  (77,  79),  IF  REQUIRED, BY DRILLING OUT RIVETS (78, 80). B. CLEANING Clean  fender  assembly  components  in  accordance  with paragraph 1-24. C. INSPECTION Inspect fender assembly components in accordance with paragraph 1-24. D. REPAIR 1. Repair  of  the  fender  assembly  consists  of  removal and replacement of defective, deformed, or damaged components. 2. Repair fender sheet metal in accordance with TC 9- 510. 3-189