TM 10-3930-664-24 3. Remove edge molding (6) from hood (2). 4. Remove    hood    hinge    (7)    from    hood    (2)    by removing four screws (8) and nuts (9). 5. Remove   sound   proofing   sheet   (10)   and   pads (11, 12) only if replacement is required. B.  CLEANING Clean  hood  components  in  accordance  with  paragraph 1-24. C.  INSPECTION 1. Inspect   hood   components   in   accordance   with paragraph 1-24. 2. Ensure gas springs hold position.  Faulty springs can  result  in  hood  collapse.    Replace  spring  if defective. 3. Inspect   sound   proofing   material   for   rips,   cuts, tears, or deterioration. D.  REPAIR 1. Repair of the hood assembly consists of removal and    replacement    of    defective,    deformed,    or damaged components. 2. Repair hood metal in accordance with TC 9-510. E.  ASSEMBLY 1. Install  sound  proofing  sheet  (10)  and  pads  (11, 12) onto hood (2). 2. Install  hood  hinge  (7)  onto  hood  (2)  using  four screws (8) and nuts (9). 3. Install edge molding (6). 4. Secure studs (4) and safety lanyards to hood (2) using nuts (3). 5. Secure    gas    springs    (1)    to    studs    (4)    using retainers (5). FOLLOW-ON MAINTENANCE: Install   latch   and   linkage   (para.   2-129) Install engine cover (para. 2-128) END OF TASK 3-164