| |
TM 10-3930-664-24
3-43.
REAR AXLE STEERING CYLINDER REPAIR
This task covers: Disassembly, Cleaning, Inspection, Repair, and Assembly
INITIAL SETUP:
Tools and Test Equipment:
Equipment Condition:
General Mechanics Tool Kit (1, App. E)
Steering cylinder removes
Retaining Ring Pliers (24, App. E)
(para. 3-42)
Materials / Parts:
Lubricating Oil (16, App. C)
Cylinder Kit, P/N 278.24.450.01 (1 ea.)
A.
DISASSEMBLY
1.
Using pliers, remove snap ring (1) from cylinder
housing (2).
2.
Push piston rod (3) with gland into cylinder
housing (2) until snap ring (4) is exposed.
CAUTION
Use care when extracting snap ring (4)
to prevent damage to inside of cylinder
housing
(2).
Use
a
deburred
screwdriver.
3.
Use screwdriver to remove snap ring (4) from
cylinder housing (2).
4.
Remove piston rod (3) from cylinder housing (2).
Remove and discard wiper (5), back-up ring (6),
seal ring (7), and three wear rings (8).
3-140
|
