| |
TM 10-3930-664-24
9.
Apply a light coat of grease to face of spacer
plate (6). Position gasket (7) onto spacer plate.
10.
Carefully mate converter housing (5) to spacer
plate (6). Ensure proper alignment of screw
mounting holes.
11.
Install seventeen screws (2, 3) and washers (4)
to secure converter housing (5) to spacer plate
(6). Refer to figure for screw locations.
12.
Torque screws (2, 3), in a criss-cross pattern, to
30 to 37 ft-lbs (40 to 50 Nm).
FOLLOW-ON MAINTENANCE:
Install torque converter (para. 3-29)
END OF TASK
3-109
|