| |
TM 10-3930-664-24
3-30. TORQUE CONVERTER HOUSING REPLACEMENT
This task covers: Removal, Cleaning, Inspection, and Installation
INITIAL SETUP:
Tools and Test Equipment:
Equipment Condition:
General Mechanics Tool Kit (1, App. E)
Torque converter removed
Retaining Ring Pliers (24, App. E)
(para. 3-29)
Puller Kit (26, App. E)
Soft Head Hammer (23, App. E)
Torque Wrench (32, App. E)
Materials / Parts:
Lubricating Oil (17, App. C)
Loctite 243 (21, App. C)
Loctite 592 (24, App. C)
Permatex Sealant #2 (40, App. C)
Grease (10, App. C)
Gasket, Item 7 (1 ea.)
O-Ring, Item 15 (1 ea.)
O-Ring, Item 17 (1 ea.)
A. REMOVAL
1.
Using pliers, remove impeller hub snap ring (1).
2.
Remove seventeen screws (2, 3) and washers
(4) that secure converter housing (5) to spacer
plate (6).
3.
Carefully separate converter housing (5) from
spacer plate (6). Place converter housing on a
clean work surface for further disassembly.
4.
Remove and discard housing to plate gasket (7).
3-106
|
