TM 10-3930-664-24 D.  INSTALLATION 1. Carefully    position    torque    converter    (10)    into converter        housing        (11).        Ensure        proper engagement with stator shaft. 2. Using   pliers,   install   snap   ring   (9)   onto   stator shaft. 3. Lubricate new O-ring (8) with clean transmission oil  and  install.    Install  torque  converter  plug  (7) and snap ring (6). 4. Position   drive   plate   (5)   with   weld   nuts   onto torque  converter.    Weld  nuts  must  face  torque converter. 5. Install drive plates (4) and backing ring (3).  Two dimples  on  backing  ring  must  face  away  from torque converter. 6. Align  holes  in  backing  ring  (3)  and  drive  plates (4, 5) with mounting holes in torque converter. 7. Install  six  screws  (1)  and  washers  (2).    Torque screws, in a criss-cross pattern, to 26 to 29 ft-lbs (35 to 39 Nm). FOLLOW-ON MAINTENANCE: Install engine and transmission (para.  3-6) END OF TASK 3-105