TM 10-3930-664-24 4. Remove screw (11) and washer (12) sets.  Remove end frame (13) from yoke housing (16). 5. Using needle-nose pliers, remove brushes from brush holder (14).  Remove brush holder from yoke housing (16). 6. Remove armature (15) from yoke housing (16). Using bearing puller, remove bearings (17, 18) from armature. 7. Remove screws (19), washers (20), and O-rings (21).  Discard O-rings. 8. Carefully separate starter housing (22) from magnetic switch (23). 9. Remove clutch assembly (24) from magnetic switch (23).  Remove steel ball (25) from clutch assembly. 3-97