TM 10-3930-664-24 4. Install spring (31) into advance head (32). 5. Install new sealing ring (30) onto spring cap (28). Install spring cap and shims (29).  Torque spring cap to 17.5 ft-lbs (28.4 N•m). 6.    Install   screw   (26)   and   new   washer   (27)   into spring cap (28). 7.    Install  new  sealing  ring  (25)  onto  piston  plug (24).  Install piston plug and torque to 17.5 ft-lbs (28.4 N•m). NOTE Banjo connections should be reinstalled in original locations. 8.    Install   banjo   connections   (22)   and   pressure valves (23).  Torque pressure valves to 23 ft-lbs (27.1 N•m). 9.    Install filter (20) into end plate (21). 10.    Install spring (18) and pressure adjuster (19) into fuel connection (16). 11.    fuel  connection  (16)  and  washer  (17)  into  end plate  (21).    Torque  fuel  connection  to  38  ft-lbs (47.6 N•m). 3-71