TM 10-3930-664-24 B. CLEANING Clean   hydraulic   reservoir   and   related components in accordance with paragraph 1-24. C. INSPECTION Inspect reservoir and related components in accordance with paragraph 1-24. D. INSTALLATION 1. Wrap  threads  of  drain  plug  (4)  with  teflon  tape. Install  drain  plug  into  hydraulic reservoir (3). 2. Install  hydraulic  reservoir  (3)  onto  forklift  frame using screws (11), washers (12), and nuts (13). 3. Wrap threads of tee (8) and elbow (9) with teflon tape.      Install  tee,  elbow,  and  new  O-ring  (10) into hydraulic reservoir (3). 4. Install elbow (2) into hydraulic reservoir (3). 5. Connect hose assemblies (1, 5, 6, 7). FOLLOW-ON MAINTENANCE: Install right rear fender (para.   2-134) Service hydraulic reservoir in accordance with Lubrication Order END OF TASK 2-453