TM 10-3930-664-24 5. Tag   and   disconnect   hose   assembly   (3)   from elbow (10). 6. Tag   and   disconnect   hose   assembly   (4)   from hydraulic  tank  elbow  (11).    Remove  clamp  from hose assembly. 7. If replacement of elbow (10) is required, tag and disconnect hose assemblies (12, 13, 14). 8. Remove     elbow     (10)     from     bracket     (15)     by removing nut (16). B.  CLEANING Clean  hose  assemblies  and  fittings    in  accordance  with paragraph 1-24. C.  INSPECTION Inspect    hose    assemblies    and    fittings    in  accordance with paragraph 1-24. D.  INSTALLATION 1. Install   elbow   (10)   onto   bracket   (15)   using   nut (16). 2. Connect  hose  assemblies  (12,  13,  14)  to  elbow (10). 3. Connect   hose   assembly   (4)   to   hydraulic   tank elbow (11).  Secure using clamp. 4. Connect hose assembly (3) to elbow (10). 2-438