TM 10-3930-664-24 7. Lower  mainlift  cylinders  until  cylinder  rods  are  fully collapsed. 6. Loosen  jam  nuts  (14).    Remove  right  mainlift  chain adjuster (15) from bracket (16) by removing nut (17). 7. Remove right mainlift chain anchor (18) by removing screws (19) and washers (20). 8. Separate   chain   adjuster   (21)   from   chain   (22)   by removing  setscrews  (23)  and  driving  out  chain  pin (24). 9. Feed right mainlift chain through upper chain roller. 10.  Repeat steps 6 through 9 for left mainlift chain. 11.  Remove   splash   guards   from   sideshift   carrier   by removing attaching parts. 2-412