TM 10-3930-664-24 2-155.  LIFT AND SIDESHIFT CHAIN REPLACEMENT This task covers: Removal, Cleaning, Inspection, Installation INITIAL SETUP: Tools and Test Equipment: Personnel Required: General Mechanics Tool Kit (1, App.  E) 2 Personnel Torque Wrench (32, App.  E) Materials / Parts: References: Loctite 242 (20, App.  C) TM 10-3930-664-10 Loctite 271 (26, App.  C) A.  REMOVAL 1. Lower  sideshift  carrier  until  it  rests  on  the  ground. While operating the lift function in the "Lower" mode, have  an  assistant  push  down  on  the  freelift  chain roller     (1)     until     cylinder     rod     (2)     has     retracted approximately 2" more. 2. Loosen jam nuts (6).  Remove freelift chain adjuster (3) from bracket (4) by removing nut (5). 3. Slide  cover  up  chain  to  expose  freelift  chain  anchor (7).    Remove  anchor  from   sideshift   carrier   (8)   by removing screws (9). 4. Remove  hose  guard  (10)  from  chain  roller  (11)    by removing      screw      (12).      Separate   freelift   chain assembly (13) from chain roller. 2-411