TM 10-3930-664-24 2-154.  CARRIAGE ASSEMBLY SERVICING This task covers: Servicing INITIAL SETUP: Tools and Test Equipment: Materials / Parts: General Mechanics Tool Kit (1, App.  E) Grease (10, App.  C) Lubricator Kit (35, App.  E) A.  SERVICING NOTE Remove   lube   fitting   (1)   from   rotate carriage   pin   (2)   only   if   cleaning   or replacement is required. 1. Using   grease   gun,   apply   grease   to   fitting   (1)   to lubricate  rotate  carriage  pin  (2).    Rotate  carriage  in each direction and reapply grease. NOTE Lubrication fitting on spine assembly is reached through an access hole in mud     guard     on     side     of     sideshift carrier. 2. Shift carriage all the way right to align lube fitting on back  of  spine   assembly   with   access   hole   in   mud guard. 3. Using grease gun, apply grease to fitting on back of spine assembly. 4. Shift  carriage  all  the  way  left  to  align  lube  fitting  on back  of  spine   assembly   with   access   hole   in   mud guard. 5. Using grease gun, apply grease to fitting on back of spine assembly. FOLLOW-ON MAINTENANCE: None END OF TASK 2-410