TM 10-3930-664-24 6. INSTALL  FITTINGS,  TEES,  AND  ELBOWS  ONTO TILT CYLINDERS. CONNECT HOSE ASSEMBLIES (1, 2, 3, 4, 5). a. Install  tee  (6),  elbow  (16),  and  new  O-ring  (17) into right tilt cylinder (10). b. Install elbow (14) and new O-ring (15) into left tilt cylinder (12). c. Connect hose assembly (3) to tee (6) and elbow (14). d. Install fitting (11) and new O-ring (13) into left tilt cylinder (12). e. Connect  hose  assembly  (5)  to  bulkhead  tee  (7) and fitting (11). f. Install    elbow    (9)    into    right    tilt    cylinder    (10). Connect  hose  assembly  (4)  to  bulkhead  tee  (7) and elbow. g. Connect hose assemblies (1, 2) to lower tee (6) and bulkhead tee (7). 7. REMOVE HOIST FROM MAST ASSEMBLY. FOLLOW-ON MAINTENANCE: Service  hydraulic  system  in  accordance with Lubrication Order END OF TASK 2-409