| |
TM 10-3930-664-24
3.
INSTALL SPINE MANIFOLD (60) AND
ADAPTERS. CONNECT HOSE ASSEMBLIES
(57, 58) AND TUBE ASSEMBLIES (62).
a.
Install adapters (63) and new O-rings (64)
into spine manifold (60).
b.
Install adapters (59) and new O-rings (61)
into spine manifold (60).
c.
Apply removable loctite to threads of
screws (65). Install spine manifold (60)
onto spine assembly using screws and
washers (66).
d.
Connect tube assemblies (62) to
adapters (63).
e.
Connect hose assemblies (57, 58) to
adapters (59).
f.
Install mud guard onto sideshift carrier
using attaching screws, washers, and
spacers.
4.
INSTALL INTERMEDIATE RAIL MANIFOLD
(41) AND ADAPTERS.
a.
Install adapters (39, 40, 46, 47, 51) and
new O-rings (42, 43, 48, 49, 52) into
intermediate rail manifold (41).
NOTE
Use the same number of washers (55,
56)
between
bracket
(53)
and
intermediate
rail
manifold
(41)
and
between bracket (53A) and head of
screw (54) as recorded during removal
of manifold.
b.
Install intermediate rail manifold (41) onto inner
rail using screw (54) and washers (55, 56).
5.
CONNECT HOSE ASSEMBLIES (1, 2, 20, 21,
44, 45, 50) TO ADAPTERS.
2-402
|
