TM 10-3930-664-24 D.  INSTALLATION 1. Install  drive  gear  (11)  onto  hydraulic  pump  (8) using nut (12).  Torque nut to 75 to 85 ft-lbs (101 to 115 Nm). 2. Install  hydraulic  pump  (8)  onto  engine  (9)  using screws (10). 3. Install fittings (5, 7) into hydraulic pump (8). Install elbow (6) onto fitting (7). 4. Connect hose assemblies (3, 4) to fitting (5) and elbow (6). 5. Close  hood  assembly  (2).    Ensure  handle  (1)  is fully engaged. FOLLOW-ON MAINTENANCE: Service hydraulic oil in accordance with Lubrication Order Raise towbar and lock in position (para.  2-126) END OF TASK 2-394