TM 10-3930-66424 2-136. FLOOR MAT REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App E) Accelerator actuator removed (para.  2-44) Materials / Parts: Directional control valve removed (para 2-150) Urethane Sealant (38, App C). Seat assembly removed Cotter Pin, Item 5 (1 ea.) (para.  2-138) References: TM 10-3930-664-24P A. REMOVAL 1. Unscrew knob (1) from axle disconnect lever (2). 2. Remove     steering     selector     handle     (3)     from steering selector valve (4) by removing cotter pin (5) and clevis pin (6).  Discard  cotter pin. 3. Remove floor mat (7) from floor plate (8). B. CLEANING 1. Clean  floor  mat  and  floor  plate  in accordance with paragraph 1-24. 2. Ensure all residual sealant is removed from floor plate.        Residual    sealant    will    prevent    proper installation. C. INSPECTION Inspect floor mat for cuts, tears, deformation, or deterioration.  Replace if damaged. 2-364