TM 10-3930-664-24 B.  CLEANING Clean transmission cover, side plates, and related components in accordance with paragraph 1-24. C.  INSPECTION Inspect transmission cover, side plates, and related components in accordance with paragraph 1-24. D.  INSTALLATION 1. Position  right  side  plate  (46)  onto  forklift  frame and   secure   using   screws   (47),   washers   (48), nuts (49) screw (50), washer (51), and nut (52). 2. Connect electrical  wiring  to  rear  of hourmeter (45). 3. Connect  electrical  cables  (38,  39,  40)  and  wire (44) to rear of slave receptacle (41) using screws (42, 43). 4. Install DCA plug  (32)  onto  right  side  plate  using screws (33), nuts (34), screw (35),  washer (36), and nut (37). 5. Install  elbows  (29,  30)  into  welded  pipe  fittings on rear of plate.  Connect hose assemblies (25, 26, 27, 28) to elbows (29, 30). 6. Connect transmission filler hose (23) and tighten hose clamp (24) to secure. 7. Install  engine  oil  dipstick  (18)  into  sleeve  (19) and   secure   using   clamp   (20).      Secure   hose clamp (22) to hood assembly frame using screw (21). 8. Attach  transmission  dipstick  sleeve  (13)  to  rear of  plate  using  screw  (14),  spacer  (15),    clamp (16),    and    nut    (17).        Install    transmission    oil dipstick (12) into sleeve. 2-352