TM 10-3930-664-24 2-125.  PINTLE HOOK REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App. E) Torque Wrench (32, App. E) A.  REMOVAL Remove  pintle  hook  (3)  from  forklift  frame  by  removing screws (1) and nuts (2). B.  CLEANING Clean pintle hook in accordance with paragraph 1-24. C   INSPECTION 1. Inspect  pintle  hook  and  related  components  in accordance with paragraph 1-24. 2. Check    hook    for    proper    latching    action.        If defective, replace hook. D.  INSTALLATION 1. Install  pintle  hook  (3)  onto  forklift  frame  using screws (1) and nuts (2). 2. Torque nuts (2) to 100 ft-lbs (135 N•m). FOLLOW-ON MAINTENANCE: None END OF TASK 2-337