TM 10-3930-664-24 2-118.    STEERING COLUMN REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.   E) Batteries disconnected (para. Steering Wheel Puller (44, App.   E) 2-78) Torque Wrench (32, App.   E) Steering wheel removed (para.   2-117) A.   REMOVAL WARNING Electrical shock hazard.   Disconnect battery ground cable or power source prior to working on electrical components.      Failure  to  heed  warning  could  cause shock,  injury  or  death.      If  electrical  shock  occurs, administer   first   aid   and   seek   medical   assistance immediately. 1. Tag   and   disconnect   horn   wire   on   steering column (1) from dash wiring harness. 2. Remove  screws  (2)  to  remove  steering  column (1)   and   orbital   steering   valve   (3)   from   instrument panel. B. CLEANING Clean steering column in accordance with paragraph 1-24. C. INSPECTION Inspect  steering  column  and  related  components  in accordance with paragraph 1-24. 2-317