TM 10-3930-664-24 A.  REMOVAL NOTE Place pan beneath hose assembly to catch residual fluids. 1. Disconnect hose assembly (1) from cylinder fitting (2). 2. Remove park brake cylinder (3) from cylinder mount (4) by removing screw (5). 3. Remove park brake cylinder (3) from axle by lifting from mounting pin (6). 4. Remove mounting pin (6) from park brake lever by removing screw (7) and washer (8). 5. Remove cylinder mount (4) by removing screw (9) and washer (10). B.  CLEANING Clean park brake cylinder in accordance with paragraph 1-24. C.  INSPECTION Inspect cylinder and related components in accordance with paragraph 1-24. D.  INSTALLATION 1. Install cylinder mount (4) using screw (9) and washer (10). 2. Install mounting pin (6) onto park brake lever using screw (7) and washer (8). 3. Position park brake cylinder (3) onto axle and slide onto mounting pin (6). 4. Install park brake cylinder (3) onto cylinder mount (4) using screw (5). 5. Connect hose assembly (1) to fitting (2). FOLLOW-ON MAINTENANCE: None END OF TASK 2-292