TM 10-3930-664-24 WARNING Use  extreme  caution  when  operating lubricating devices that require compressed  air.    Improper  use  could cause personal injury. 4. APPLY    GREASE    TO    PIVOT    PIN    GREASE FITTINGS  (9).  FITTINGS ARE  LOCATED AT TOP AND BOTTOM OF AXLE CASES. 5. DRAIN    AND    SERVICE    PLANETARY    GEAR CARRIERS (10) THROUGH PLUGS (8). NOTE Planetary gear carriers must be positioned    by    moving    the    forklift forward   or   rearward   to   position   the fill/drain  plug  as  required  to  perform service. a. Move  forklift  to  position  planetary  gear  carriers (10)  so  that  plugs  (8)  are  at  6  o’clock  position (carrier arrow pointing left). b. Remove plugs (8) and drain oil. c. Move  forklift  to  position  planetary  gear  carriers (10)  so  that  plugs  (6)  are  at  3  o’clock  position (carrier arrow pointing down). d. Fill planetary gear carriers (10) with oil.  Reinstall plugs (8). FOLLOW-ON MAINTENANCE: None END OF TASK 2-286