TM 10-3930-664-24 D.  INSTALLATION 1. Position  rear  drive  shaft  (8)  to  rear  axle  (11), ensuring  proper  hole  alignment.   Secure using screws (12) and locknuts (13). 2. Position  rear  drive  shaft  (8)  to  transmission  (2), ensuring  proper  hole  alignment.    Secure  using screws (9) and lockwashers (10). 3. Torque   screws   (9,   12)   to   40-48   ft-lbs   (54-65 Nm). 4. Position  front  drive  shaft  (1)   to   front   axle   (5), ensuring  proper  hole  alignment.    Secure  using screws (6) and locknuts (7). 5. Position front drive shaft (1) to transmission (2), ensuring  proper  hole  alignment.    Secure  using screws (3) and lockwashers (4). 6. Torque screws (3, 6) to 40-48 ft-lbs (54-65 Nm). FOLLOW-ON MAINTENANCE: Service front and rear drive shafts (para.  2-98) END OF TASK 2-277