TM 10-3930-664-24 2. REMOVE FIVE MICRO SWITCHES (2) SWITCH   SPACERS   (17),   ACTUATORS   (18), AND FASTENERS (19) FROM SWITCH BRACKETS  (21,  22)  BY  REMOVING  SCREWS (20) AND LOCKWASHERS (37). 3. REMOVE  SWITCH  BRACKETS  (21,  22)  AND SWITCH ACTUATORS (25, 26). a. Remove   switch   brackets   (21,   22)   from shifter  housing  (32)  by  removing  screws (23) and nuts (24). b. Remove   switch   actuators   (25,   26)   and spacers  (27)  from  shifter  housing  (32)  by removing  screws  (28),  lockwashers  (38), and nuts (29). 4. REMOVE KNOB (30).  REMOVE GATE PLATE (31)     FROM     SHIFTER     HOUSING     (32) BY REMOVING    SCREWS    (33),    WASHERS    (34, 35), AND NUTS (36). B.  CLEANING Clean   transmission   shifter   components   in   accordance with paragraph 1-24. C.  INSPECTION Inspect  transmission  shifter  components  in  accordance with paragraph 1-24. D.  ASSEMBLY 1. INSTALL  GATE  PLATE  (31)   ONTO   SHIFTER HOUSING (32) USING SCREWS (33), WASHERS (34, 35), AND NUTS (36). INSTALL KNOB (30). 2. INSTALL   SWITCH   BRACKETS   (21,   22)   AND SWITCH ACTUATORS (25, 26). a. Install  switch  brackets  (21,  22)  to  shifter housing  (32)  using  screws  (23)  and  nuts (24). b. Install     switch     actuators     (25,     26)     and spacers  (27)  to  shifter  housing  (32)  using screws  (28),  lockwashers  (38),  and  nuts (29). 3. INSTALL FIVE MICRO SWITCHES (2), SWITCH   SPACERS   (17),   ACTUATORS   (18), AND FASTENERS (19) TO SWITCH BRACKETS    (21,    22)    USING    SCREWS    (20) AND LOCKWASHERS (37). 2-261