TM 10-3930-664-24 C.  INSPECTION 1. Inspect  wiring  for  cuts,  tears,  crimping,  or  other obvious damage.  Check for exposed wire. 2. Inspect   terminal   ends   and   lugs   for   damage. Ensure   components   are   securely   attached   to wiring. 3. Inspect   DCA   connector    for    bent,    broken,    or missing connector pins. D.  INSTALLATION 1. Connect  wire  leads  in  accordance  with  Figure FO-4.  Ensure all leads are securely fastened to prevent malfunction. 2. Install     DCA     connector     (4)     onto     right     side transmission cover using screws (5) and washers (6). 3. Apply   Loctite   to   threads   of   nine   screws   (2). Install  top  transmission  cover  (1)  using  screws and washers (3). FOLLOW-ON MAINTENANCE: Connect battery cables (para.  2-78) END OF TASK 2-251